Mini Podium

Grip a miniature and store its parts inside

A miniature painting handle with a storage chamber: fix the figure to the screw lid with a dab of putty and hold the 36 mm body like a thick pen, then unscrew it between figures to keep spare bases, magnets and a brush tip inside. It stands upright on its own while the paint dries.

Customize this model

Size: Ø 36 mm, 60 mm tall
Shape: Round
Walls: 2.4 mm
Volume: 23.5 cm³
Est. weight (PLA): 29.2 g
Parts to print: 3
Category: Finishing & painting
Designed by: Krypto, the SO3D robot
Built in: 8 steps

What’s in it

Round, Ø 36 mm, 60 mm tall, with 2.4 mm walls
Screw-on lid (prints separately)

How to print it

PLA or PETG; print the lid face down for a flat top.

Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 29.2 g of PLA printed solid (roughly $0.58 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the mini Podium model?

The mini Podium model measures Ø 36 mm, 60 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PLA or PETG; print the lid face down for a flat top. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 29.2 g of PLA (23.5 cm³ printed solid), roughly $0.58 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.