Showcase

Models Showcase

Models designed by Krypto, the SO3D robot, and by our members. Open any of them in the generator to see exactly how it was built, remix it, or print it as-is. Browse the model library by category

All Kitchen Desk & office Workshop Bedroom & bathroom Others
Preview of Two-wheel robot chassis plate
By Krypto, the SO3D robot
Complexity
Medium
Workshop Electronics & robotics
0
Two-wheel robot chassis plate
MAIN PURPOSE: Build a small hobby robot
A base plate for a small two-wheel robot: the wheels sit in the side slots, a ball caster goes through the front hole, and the four small holes take a microcontroller board, with a cable hole in the middle.
Printing notes
63.2 cm³
Volume
78.4 g
Est. weight
2,960
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of 80 mm fan guard
By Krypto, the SO3D robot
Complexity
Medium
Workshop Electronics & robotics
0
80 mm fan guard
MAIN PURPOSE: Guard an 80 mm cooling fan
A honeycomb finger guard for an 80 mm cooling fan in a printer, a PC or an electronics box; it bolts on through the four corner holes with the fan's own screws.
Printing notes
11.3 cm³
Volume
14.0 g
Est. weight
3,660
Triangles

Prints flat as a plate, no supports.

AR view Open in app
Preview of Helping hands base for coolant hose arms
By Krypto, the SO3D robot
Complexity
Medium
Workshop Electronics & robotics
0
Helping hands base for coolant hose arms
MAIN PURPOSE: Hold circuit boards and wires while soldering
A heavy base for home-made helping hands: push four 1/4-inch segmented coolant hose arms with crocodile clips into the top holes, and fill the base with sand through the bottom hole so it stays put while you solder.
Printing notes
87.5 cm³
Volume
108.5 g
Est. weight
1,840
Triangles

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Grocery bag dispenser
By Krypto, the SO3D robot
Complexity
Simple
Others Sustainable living
0
Grocery bag dispenser
MAIN PURPOSE: Store and reuse carrier bags
Stuff used carrier bags in at the top and pull them out one at a time from the opening at the bottom; it hangs on the wall or inside a cupboard door from the two keyholes.
Printing notes
39.4 cm³
Volume
48.9 g
Est. weight
2,168
Triangles

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

AR view Open in app
Preview of Desk cable grommet
By Krypto, the SO3D robot
Complexity
Medium
Others Home hardware & architecture
0
Desk cable grommet
MAIN PURPOSE: Line a cable hole through a desk
Finishes a 60 mm cable hole drilled through a desk or worktop: the sleeve lines the hole and the flange covers the rough edge, so cables slide through without catching.
Printing notes
16.8 cm³
Volume
20.9 g
Est. weight
1,176
Triangles

Print flange-down; no supports. Prints flat as a plate, no supports. Stacked parts are fused into one print.

AR view Open in app
Preview of Drop-in vent grille
By Krypto, the SO3D robot
Complexity
Medium
Others Home hardware & architecture
0
Drop-in vent grille
MAIN PURPOSE: Cover a ventilation opening
A slotted grille for a floor or wall vent opening with a rebate: the skirt drops into the opening and the slotted face lets air through while stopping toys and socks falling in. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
40.2 cm³
Volume
49.8 g
Est. weight
17,736
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Self-adhesive J hook
By Krypto, the SO3D robot
Complexity
Simple
Others Home hardware & architecture
0
Self-adhesive J hook
MAIN PURPOSE: Hang light items without drilling
A strong J hook for a towel, a bag or headphones that needs no drilling: stick it to tiles, glass or a cupboard door with a strip of double-sided foam tape on the flat back.
Printing notes
7.9 cm³
Volume
9.7 g
Est. weight
244
Triangles

Print lying flat so the layers run along the hook; PETG holds better than PLA.

AR view Open in app
Preview of Door wedge
By Krypto, the SO3D robot
Complexity
Simple
Others Home hardware & architecture
0
Door wedge
MAIN PURPOSE: Hold a door open
A slim 12-degree door wedge that grips: push the thin end under the door and it holds it open on wood, tile or carpet. It prints standing on its side; lay it down on its long, flat edge to use it.
Printing notes
61.4 cm³
Volume
76.1 g
Est. weight
152
Triangles

Print as it comes (wedge outline on the bed); PETG or TPU grips floors best.

AR view Open in app
Preview of Cabinet knob
By Krypto, the SO3D robot
Complexity
Medium (set)
Others Home hardware & architecture
0
Cabinet knob
MAIN PURPOSE: Replace or add cabinet knobs
A round cabinet or drawer knob: drive a 4 mm screw through the door from the inside into the stem. Print a set in one colour for a quick kitchen refresh. Print it as shown, then turn it over so the floor becomes the top.
Printing notes
6.8 cm³
Volume
8.5 g
Est. weight
1,528
Triangles

Print floor-down as shown, then turn it over to use it.

AR view Open in app
Preview of Skirting board cable channel
By Krypto, the SO3D robot
Complexity
Simple
Others Home hardware & architecture
0
Skirting board cable channel
MAIN PURPOSE: Route cables along a wall
Runs a few cables neatly along a skirting board: screw or stick the channel down, press the cables past the two inner lips, and paint it to match the wall.
Printing notes
9.8 cm³
Volume
12.1 g
Est. weight
444
Triangles

Prints as shown on its floor, no supports.

AR view Open in app

SO3D.xyz is free and built by one maker. Help keep it running.

Be one of the first supporters this month.
Support · Buy me a coffeeSee the Hobbyist plan